Multi-Function Epoxy Puttyg 100g_Alu.bag  |Epoxy Resin  <br/>環氧樹脂

Multi-Function Epoxy Puttyg 100g_Alu.bag


such as bonds, repairs, seals, waterproof, insulation, and duplication, can shape it into whatever you like. After full curing rock-hard, endures 650℉ , and can be painted, sanded drilled, machine, threaded, tapped, resist weak chemicals.

代碼 NE03429

人氣 71





All purpose Epoxy putty is two part epoxy putty stick. It hardens at a medium speed. It has many purpose, such as bonds, repairs, seals, waterproof, insulation, and duplication. You can shape it into whatever you like. After full curing rock-hard, endures 650℉ , and can be painted, sanded drilled, machine, threaded, tapped, resist weak chemicals.

APPLICATIONS:
For repairing and bonding metal, stone, ceramics, glass, fiberglass, wood, glass, hard plastic, etc. It can replace missing parts & duplicate damaged parts. (machine components, mold accessories, screw, nut, bolt, etc)

DIRECTIONS:
1. Clean and roughen bond area prior to application.
2. Cut off required amount. Peel off the plastic wrapper. Knead and mix to uniform color.
3. Force into any cracks or holes to be filled and strike off excess material. (A smooth appearance, moisten hands to rub before hardening.)
4. Finish the whole operation within 30 minutes. It can be used after 2 hours. The best adhesion occurs after 24 hours.
【The temperature below 10℃, the hardening time is longer.】

CAUTION:
May irritate sensitive skin when it doesn’t cure. The wearing of  gloves is recommended. For skin contact, wipe off contamination and wash thoroughly with soap and warm water. In case of eye contact, flush with  water at least 15 minutes and get medical  attention. If swallowed, consult a physician immediately.
【KEEP OUT OF REACH OF CHILDREN】

CONTAINS:Epoxy Resin,Ploymercaptan.

多功能塑鋼土是一種分子(油灰狀)產品,兩劑強迫混合,中等數度硬化,操作時間急迫,用途非常廣泛,可修補、黏合、密封、防水、絕緣(不導電)、開發、創作、塑型、複製。完全硬化後,硬度特佳,耐高溫650℉,可抗大多數化學侵蝕,可上漆。可行車金先、削、磨、鑽。

適合用途:
各種金屬材質,石材、陶瓷、玻璃纖維、木材、玻璃、硬質塑膠均可修補黏合,可取代絕緣膠布密封防水用,可替代並複製缺損零件(機械零件,模具配件、螺絲、剝落螺紋、螺栓等。)

使用說明:
1.將修補黏著處表面用砂磨予粗糙,並保持潔淨乾燥。
2.切下所需量,剝去塑膠膜,揉成同一種顏色均勻為止。
3.嵌入修補處,用手強壓入。(要表面造型美麗,可用水沾濕手指整平)
4.請在30分鐘之內完成全部修補黏合之固定作業,2小時即可使用,最佳黏合強度須經24小時。【氣溫低於10℃以下則硬化時間較長】

注意事項:本產品未凝固前可能會刺激過敏性皮膚,建議使用時戴保護手套,皮膚接觸到時先擦拭掉污漬,用肥皂和溫水清洗,誤入眼睛時不可搓揉,用清水沖洗數分,且就醫診治,若誤食立刻送醫。
【存放兒童取扱不到的地方】

主要成分:高分子環氧樹脂、聚醯醇樹脂。

產品規格:塑型、複製、絕緣、修補黏合用【AB兩劑捲心包裝】 重量:100g




 

商品己加入詢價車

Faded Short Sleeve T-shirts

Multi-Function Epoxy Puttyg 100g_Alu.bag

such as bonds, repairs, seals, waterproof, insulation, and duplication, can shape it into whatever you like. After full curing rock-hard, endures 650℉ , and can be painted, sanded drilled, machine, threaded, tapped, resist weak chemicals.