Application:
Flexible foam, sound insulation, heat insulation materials, office partition
screens. car, ship interior, carpets, skirt ion boards, wood products plywood, decorative board, cardboard fiber products, plastic, rubber, metal, leather, nonwoven, textile. Instruction for use:
1. Ensure the bonding surfaces is dry, clean, and grease. Shake can well before use.
2. Select the appropriate spray width; adjust the nozzle(L: narrow M: middle H:wide)
3. Previous protection is recommended. Hold 10-20 cm from surface, vertical spray evenly on both surfaces, allow adhesive to dry to tack within 1-3 minutes, then bond to surface.
4. Not suitable for heavy material which suspended in midair. Caution:
Use only in well ventilated. Keep away from sources of ignition. Irritation for eyes, skin, respiratory system. Protection is recommended. For skin contact wipe off contamination and wash thoroughly with soap and warm water. In case of eye contact, rinse with plenty of warm water and get prompt medical attention. If swallowed, seek the physician. KEEP OUR OF REACH OF CHIKDREN!!!
Improper use may damage the surface. It is advisable to test an application on a hidden area if there is ant doubt before use. Be sure to dump the waste in permitted environment under the law.
Contains: Synthetic resin, DME solvent, Store below 49℃ in dry place, avoid exposure to sunlight.