Accelerated curing of super glue (Cyanoacrylate）220ml
Accelerated curing of super glue (Cyanoacrylate）
Reduce Cyanoacrylate Blooming. Shorten curing time.
加速瞬間接著劑(氫基丙烯酸樹脂)硬化速度
降低氫基丙烯酸接著處白化現象，縮短填補間隙硬化時間
代碼 NA04945
人氣 129
Accelerated curing of super glue (Cyanoacrylate）
Reduce Cyanoacrylate Blooming. Shorten curing time.
DIRECTIONS:
After apply the super glue, use this accelerator spray it on.
CAUTIONS:
ACCELERATOR Please store at below 50Ċ. Avoid direct exposure to sunlight.
Do not beat or burn the can. Use in well-ventilated conditions. Do not spray near the fire or blazing flame.
In case of eye contact, rinse with water for a few minutes and get medical attention.
If swallowed, please consult a physician.
[KEEP OUT OF REACH OF CHILDREN]
Improper use may damage the surface. Be sure to test on an inconspicuous area in advance.
Testing satisfaction before formal use is a must.
用途：
加速瞬間接著劑(氫基丙烯酸樹脂)硬化速度
降低氫基丙烯酸接著處白化現象，縮短填補間隙硬化時間
使用方法:
將本劑直接噴向瞬間接著劑膠水上
注意事項：
本產品應收藏於低溫50℃以下，勿陽光直接照射遠離火源。不可敲打或焚燒罐子，
請於空氣流通施工，禁止直接噴向火源，誤觸皮膚時用清水和肥皂清洗即可，若不
慎觸及眼睛，直接用清水沖洗數分且就醫診治，若誤食，立刻送醫治療。
【請置於兒童取扱不到的地方】不當使用，可能會造成物品受損，務必事先測試接
著物材質，測試滿意才使用本產品進行施工黏合，未適當使用及操作本產品，造成
任何直接或間接及偶發傷害，不負任何之責任。