1. 首頁
2. Epoxy Resin
   環氧樹脂

1. 首頁
2. Epoxy Resin
   環氧樹脂

This item is construction adhesive suitable for concrete, stone, hollow bricks (construction buckle, tower crane, installation sleeve, and reinforcing bar, rod, injection anchor.)

HOW TO USE:
1.Unscrew the cap.
2.Attach the mixer nozzle.
3.Place injection anchor into the applicator gun.
4.Use of the initial adhesive flowing out of the mixing nozzle is not permitted.

Installation procedures for the reinforced concrete.
1.Drill a hole according to technical date.
2.Clean up the hole with steel brush and air pump.
   Ensure the hole is clean, free from dust, water and grease.
3.Inject adhesive into hole.
4.Insert the rod or bar smoothly.
5.DO NOT MOVE DURING HARDENING TIME.
6.After hardening process is complete, it can start to load.

Installation procedures for the hollow brick.
1.Drill a hole according to technical date. Clean up the hole with steel brush and air pump. Ensure the hole is clean, free from dust water and grease.
2.Set and fix the mesh. Inject adhesive into mesh.
3.Insert the anchor, reinforcing bar or rod smoothly.
4.DO NOT MOVE DURING HARDENING TIME.
5.After hardening process is complete, it can start to load.

Risk phrases: r30/22 harmful by inhalation and if swallowed.
Sensitization by skin contact.
Safety phrases:S1/2 Keep locked up and out of the reach of children.
S36/34/39 Wear protective clothing, gloves and eye protector.
S26 in case of contact with eyes, rinse with plenty of water immediately and seek medical attention.
S28 After contact with the skin, wash immediately with plenty of soap and water.

適合用途:
混泥土、石材、空心磚(結構連接器、搭吊安裝螺桿、內螺牙套筒、種植鋼筋、錨栓)等…..結構黏接。

使用方法：
1.鬆開螺絲蓋。
2.物料出口套上靜態攪拌器旋緊。
3.將環氧植筋膠安裝於施工槍。
4.先擠出前段Ａ、Ｂ比例不良品丟掉。

Ｒ、Ｃ安裝步驟：
1.參考技術資料鑽孔。
2.用鋼刷和吹氣筒清孔，孔內確保乾淨。
3.將本劑注入孔內。
4.將鋼筋或螺桿慢慢旋入。
5.鋼筋或螺桿安裝後，在完全硬化前請勿碰觸。（碰觸會造成接觸不佳）
6.在完全硬化後即可固定物件。

注意事項：
本產品未凝固前可能會刺激過敏性皮膚，使用時穿戴保護衣物，不慎皮膚接觸到時，先擦拭掉污漬，用（乙醇）酒精即可擦拭乾淨，誤入眼睛時不可搓揉，用清水沖洗，數分且就醫診治，若誤食立刻送醫治療。【請置於兒童取扱不到的地方】

主要成分：高分子環氧樹脂 容量：390ml

---